How To Build Patio Steps Out Of Pavers

How to Build Patio Steps Out of Pavers

Building patio steps out of pavers is a great way to add style and functionality to your outdoor space. They also require minimal maintenance and are easy to clean. This article will cover everything you need to know to build your own patio steps out of pavers.

Materials You'll Need

Before you get started, you'll need to gather the following materials:

Pavers
Sand or gravel
Step risers
Tamp
Level
Plumb line
String
Masonry adhesive

Step 1: Determine the Number of Steps

The first step is to determine the number of steps you need. This will depend on the height of your patio and the desired height of each step.

Step 2: Mark the Location of the Steps

Once you know how many steps you need, you'll need to mark their location. To do this, set the first step in place and level it. Then, measure the distance from the top of the first step to the desired height of the next step. Mark this spot and continue the process until you have marked all of the steps.

Step 3: Excavate the Steps

Once you have marked the location of the steps, you'll need to excavate them. To do this, dig down to a depth of about 6 inches below the desired height of each step.

Step 4: Fill the Holes with Sand or Gravel

Once the steps have been excavated, you'll need to fill the holes with sand or gravel. To do this, simply pour the sand or gravel into the hole and tamp it down.

Step 5: Install the Step Risers

The next step is to install the step risers. These are the vertical pieces that will form the front of each step. To install the step risers, apply a bead of masonry adhesive to the back of each riser and press it into place.

Step 6: Install the Pavers

Once the step risers have been installed, you can start installing the pavers. To do this, simply lay the pavers on top of the step risers and press them down into place. Be sure to leave a small space between each paver for drainage.

Step 7: Level the Pavers

Once all of the pavers have been installed, you'll need to level them. To do this, use a level to check the surface of each step. If any of the pavers are uneven, simply lift them up and adjust the underlying sand or gravel.

Step 8: Fill the Joints with Sand

Once the pavers have been leveled, you'll need to fill the joints with sand. To do this, simply pour the sand into the joints and sweep it in.

Step 9: Seal the Steps

Finally, you can seal the steps to protect them from the elements. To do this, simply apply a sealant according to the manufacturer's instructions.

Conclusion

Building patio steps out of pavers is a great way to add style and functionality to your outdoor space. With a little planning and effort, you can easily build your own steps and add a touch of sophistication to your home.